Products
-
The 1500XA Gas Chromatograph is an air-bath style GC engineered for complex applications requiring multiple detectors and parallel chromatography. The 1500XA is ideal for your natural gas processing applications where instrument air is available and requires higher oven temperatures than are available in a heat-sink design. As with other Danalyzer’s, the 1500XA is rated for 0 to 130 °F (-15 to 55 °C) operation, providing the most stable analysis for an air-bath oven and reducing your installation and utility costs significantly.
BTU and 0-300 PPM H2S measurements are used for EPA Federal Regulation 40 CFR part 60, subpart Ja compliance where Continuous Emissions Monitoring Systems are required by the EPA.
-
The Danalyzer 370XA is designed to simplify natural gas measurement analysis in Fiscal and Custody Transfer applications and improve the measurement performance of your C6+ BTU/CV analysis.
A unique benefit to the 370XA is its Maintainable Module™ technology, which allows the operator to easily replace the GC module in the field in under two hours, greatly reducing downtime and overall operating costs.
For additional information, please visit RosemountAnalytical.com
-
The Danalyzer 500 Gas Chromatograph is the industry’s most trusted analyzer for natural gas custody transfer applications. This air-less heat-sink style GC has a unique “open-oven” design that is also ideal for very rich gases or natural gas liquids (NGL) that require very high temperature heating for the sample lines.[…]
-
The Danalyzer 700XA Gas Chromatograph is an air-less heat-sink style gas chromatograph with dual-detector/parallel analysis capabilities in a rugged explosion-proof housing suitable for installations in extreme conditions. The 700XA Gas Chromatograph provides you the most accurate custody transfer measurement available with extended analysis options (including the C9+ with hydrocarbon dew point calculations) for complex natural gas measurement.
-
The GPR™ consists of a housing and a membrane-tipped probe regulator. The housing is installed in a depressurized pipeline through a vertically mounted thread-o-let or flange, and contains a “foot valve” in its lower end. Inserting the probe into the housing opens the “foot valve”, allowing pipeline gas to flow[…]
-
ANALYZER BUILDING: Single or Multi-Room, Class 1 Div 1,2 Analyzer Shelters/CEMS Integration Packages are delivered with full electrical, tubing and testing, ready for installation and operation. We provide technical support, start-up and commissioning services with full system documentation on every project we deliver.
-
Fabricated Strainers • Gas or Liquid Service • APOLLO FV SERIES STRAINERS are widely used to remove solids from many different types of gas and liquid piping systems. In addition to the standard FV Series with slope top baskets, several other variations such as flat top baskets with offset nozzles[…]
-
The GFR Series Gas Filter is a line supported unit that was designed for gas distribution applications. The single element, one entry design makes maintenance easy. Units are normally installed top up, but can be mounted in any orientation. New design incorporates element stabilization brackets to minimize extra wear on filter elements[…]
